Material Feeder / Auto-Loader

570.00
+
Write a review
PlasticHub
We're a 100% open source vendor and mainly produce for communities, schools, universi...

300G Automatic Material Feeding Machine Vacuum Feeder Auto Loader 220V

  • It conveys plastic granules to the injection mold machine with ease. It is easy to operate and its filter system makes it possible to be used for a long time. An independent filter device facilitates dust removal and noise-reducing installations for silent operations. The machines are available in conveying capacity ranges of 300Kg/hr. Vacuum Auto-Loader has found a large number of users swear by the qualitative parameters of this product.
  • The vacuum feeding machine is applicable for conveying raw materials and granulated materials for avoiding pollution. It is featured by microcomputer control, simple operation and easy repair, and may automatically alarm when there isn't material. Stainless steel material chamber door for protecting the materials from pollution, independent filtering device. It is convenient for removing dust, adopting a double pole switch to control the feeding action (optional), motor protective device, filter observing window. A two-material proportional valve is optional for mixing new material with granulated material or immediately recycling granulated material.

Installation

- Start the machine, press SET to set sucking materials time, keep on press INC and DEC to increase and decrease the time within 3s. The manufacturer-set time is 15 seconds.
- Press RUN to start sucking, press again will stop sucking; The machine will stop working and sound alarm with three times no materials sucking; The machine will automatic sucking materials once power-on reset if you haven't stopped the working machine before power dump.
- Set loading time when the machine is on stop condition, after that the machine will feed automatically.

Maintenance
- Set the sucking time which should be the time length needed for the sucking to fill 90% of the storage tank.
- Periodical examination and cleaning of the air filter device.
- Clean the filter net once the sucking abates.
- Change the carbon brush in time, while strange sound, spark appear, or current increase of motor.

Feature
- Microprocessor programmed operation.
- Alarm for the shortage of material.
- Adopted high-speed motor, small volume with strong suction power, suitable for different types of new materials.
- Installed with dust collector to save dismantling mainframe for cleaning
- Remote controller, easy to set and control
- 1-year warranty

Specifications
- Type: Carbon brush type
- Specification: 1kw/1.3hp 1Φ
- Voltage: 220v 50hz
- Material feeding capacity: 300kg/h
- Suction lift: 3.5m
- Static air pressure(MAX): 1300mm/HZO
- Storage tank capacity: 7.5L
- Internal diameter of conveying pipe(mm): Φ38
- Specification of the attached hoses: Φ38x3.5 1pcs
- Main Unit: 340x340x590mm
- Weight: 12Kgs

Package included
- 1 X Integrated Machine(Main Frame+Hopper)

No reviews found